GHD Repairs: Breathe new life into your GHD hair straighteners

Ask GHD owners regardless of whether they nevertheless have the box their GHDs arrived in and many would say sure, even decades immediately after buy. GHD proprietors are typically walking advertisement for the good quality of the item. Not just the good quality results the GHD hair straighteners develop, but also their enthusiasm for their GHD hair straighteners and the brand in common. It is not surprising that when individuals use GHD hair straighteners they will normally stick with the top brand name.

 

The benefits are outstanding and just about every model continues to boost on the previous. Nonetheless even the older designs are of such good quality that more recent designs from the opposition fall short to match their results!

 

GHD hair straighteners are good not just for straightening hair, but for including curls or waves. Proprietors will inform you about how effortlessly they glide by means of their hair, which means they are not tugging and damaging their hair. How this signifies they preserve time when they are utilizing their GHD hair straighteners.

 

GHD owners typically appear right after their GHD hair straighteners. That is why it is not surprising that when accidents arise or they break down, we repair older designs as very well as the new GHD hair straighteners.

 

Breathe new everyday life into your GHD hair straighteners!

 

We can aid you resurrect your GHD hair straighteners by repairing them. We are utilized to repairing mk3, mk4 and the specific edition sets. Nonetheless if the plastic of the GHD hair straightener is cracked or broken, we usually go over with our possible consumer beforehand if we can truly repair their GHD hair straighteners. So if this is the case for your GHD hair straighteners please speak to us in advance of booking a repair.

 

Just because the GHD hair straighteners turn into faulty does not mean it is the stop of the road for them. You do not have to throw them away since they end operating!

 

At GHD Repairs Direct we employee skilled electricians who know how to repair GHD hair straighteners. The group have the correct parts at hand and the accurate equipment to make the repair.

 

We return the GHD hair straighteners repaired in 72 hours and there are no hidden fees. Just about every pair of GHD hair straighteners undergo moveable appliance testing to ensure they are functioning properly. PAT is an critical part of our repair approach, which quite a few other electricians sadly do not carry out, even though it is a legal requirement.

 

When it arrives to hair straighteners, GHD is the brand name to use. When it arrives to GHD repairs we are the firm to employ.

About the Author

Raymond Peck is a senior associate at GHD Repairs Direct and has spent many years in the GHD Repair Industry.

 

For far more information pay a visit to: GHD Repair visit the website at http://ghdrepairsdirect.co.uk/

 

Apple iPad Battery Replacement & Repair Directions by DirectFix.com

Misto Olive Oil Sprayer …

Zyliss 20362 Lock-n-Lift Manual Can Opener, White $11.68 The Zyliss lock-n-lift can opener is ergonomically designed for comfort and maximum efficiency. Opener locks onto can for easy pouring. Magnet with release lever lifts lid and releases it for safe and easy disposal. Hands never touch the lid!…

Kyocera Ceramic Coffee Grinder $41.70 This ceramic coffee grinder features a ceramic grinding mechanism that will never alter the flavor of the grinds, resulting in fresh, flavorful, and pure coffee. The grinding mechanism is made from an advanced ceramic close in hardness to diamond that will never rust providing ultra long-life performance. The grind adjustment allows for fine to coarse grinds and the non-slip base ensures stability…

Breakdowns and Headaches $1.99 …

Intense Hydrating Mask from Moroccanoil A rich, creamy treatment, designed to hydrate and repair damaged hair.&ampnbsp With continued use, this highly effective mask revitalizes hair, restoring shine and manageability….

Neutrogena Microdermabrasion System $14.50 Visible Results in Just One UseThe Neutrogena Microdermabrasion System has a combination of exfoliating crystals and microvibrations that deliver refined texture and radiance in just one use.This system is clinically proven to deliver the same results as a microdermabrasion treatment from a dermatologist. You will see smoother, more radiant skin instantly, and firmer, younger-looking skin over tim…

CeraVe Moisturizing Cream (16 oz) $10.99 CeraVe Moisturizing Cream is a vital part of a daily skin care routine. Its patented MVE formulation releases ceramides and other essential ingredients throughout the day, so they penetrate deep into the skin to hydrate and nourish.Developed with dermatologistsHelps restore and maintain the skin´s natural protective functionPatented Multivesicular Emulsion (MVE) formulationContains ceramides tha…

Tomy Big Loader $21.05 Little Construction workers will love getting a load of this! Go to work loading and fillling, scooping and hauling, dumping and lifting. Motorized chassis knows when to automatically swap between skip loader, dump truck and tractor actions. Includes 8 feet of track and 20 rocks….

LEGO® Road Construction Set (6187) $19.99 Little construction workers can dig up all sorts of fun with this set. They can build a truck, a front loader, a steamroller and much more. Includes one minifigure. 300 pieces….

LEGO City Small Car (3177) $5.39 Pieces: 43For the driver who’s always on the go!It’s time for a fun day of driving around LEGO® City! Thanks to this compact car’s modern size and styling, you’ll be able to avoid traffic jams and squeeze into tiny parking spaces wherever you go. Includes driver minifigure.Includes car and driver minifigureZip around LEGO City in this little compact car!…

Direction $11.68 Direction

DIRECTION: THEREE DIRECTION $43.61 DIRECTION: THEREE DIRECTION

In This Direction $15.18 For his second album as a leader, pianist Benny Green is showcased in a trio with bassist Buster Wiliams and drummer Lewis Nash. Nearing the end of his two-year stint with Art Blakey’s Jazz Messengers, Green had mixed together elements of Bobby Timmons and Oscar Peterson in his own impressive style. He performs two numbers apiece by Buster Williams and Bud Powell (including “I’ll Keep Lovin’ You”), the standard “What Is There to Say,” Thelonious Monk’s complex “Trinkle Tinkle,” and his own “Dealin’ With a Feelin’” on a well-rounded and consistently swinging outing. ~ Scott Yanow, Rovi Performers: Benny Green – Piano; Buster Williams – Bass; Lewis Nash – Drums

In the Direction $19.18 Description not provided.

No Direction $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever.

A Sense of Direction $13.99 A Sense of Direction

Direction Nashville $19.99 Direction Nashville

Changing Direction $14.71 Changing Direction

Spiritual Direction $9.71 Spiritual Direction

No Direction Home $12.55 No Direction Home

A Spiritual Direction $12.47 A Spiritual Direction

Wrong Direction $8.37 Wrong Direction

Changes of Direction $22.12 Changes of Direction

Sense of Direction $17.55 Sense of Direction

New Direction $7.83 New Direction

Position and Direction $17.01 Position and Direction

Dare to Repair, Replace & Renovate $9.99 There’s no place like home! And that’s why we’re back. Dare to Repair, Replace & Renovate is the sequel to Dare to Repair , the national bestselling home repair book for women. In our first book, we taught you how to fix a leaky faucet. In this book, we teach you how to replace it. In our first book, we showed you how to change the direction of ceiling fan blades. In this book, we show you how to install a new fan. We’ve gone from basic repairs to easy projects that can make your home more comfortable, more beautiful, and more valuable. We will show you how to: Put up a tile backsplash Install a closet system Install a deadbolt lock Replace a medicine cabinet Mount blinds, shades, and shutters Install landscape lighting And we provide easy, step-by-step instructions so you can get rid of the things in your home that are making you crazy: Ugly chandelier? Gone. Outdated vanity? Out of there. Broken garbage disposal? History. Torn wallpaper? Buh-bye. Incorporating detailed illustrations with witty and encouraging instructions, Dare to Repair, Replace & Renovate will allow you to turn your project wish list into a can-do list.

Dare To Repair, Replace & Renovate $10.09 There’s no place like home! And that’s why we’re back. Dare to Repair, Replace & Renovate is the sequel to Dare to Repair , the national bestselling home repair book for women. In our first book, we taught you how to fix a leaky faucet. In this book, we teach you how to replace it. In our first book, we showed you how to change the direction of ceiling fan blades. In this book, we show you how to install a new fan. We’ve gone from basic repairs to easy projects that can make your home more comfortable, more beautiful, and more valuable. We will show you how to: Put up a tile backsplash Install a closet system Install a deadbolt lock Replace a medicine cabinet Mount blinds, shades, and shutters Install landscape lighting And we provide easy, step-by-step instructions so you can get rid of the things in your home that are making you crazy: Ugly chandelier? Gone. Outdated vanity? Out of there. Broken garbage disposal? History. Torn wallpaper? Buh-bye. Incorporating detailed illustrations with witty and encouraging instructions, Dare to Repair, Replace & Renovate will allow you to turn your project wish list into a can-do list.

Left Buttons Direction Buttons Keypad Key Flex Ribbon Cable for Sony PSP 1000 $1.89 Overview:A brand new direction button keypad key flex ribbon cable for PSP 1000This flex cable is only compatible with the PSP 1000 Easy to repair your psp 1000 by yourselfPerfect repairment part for yor old, damaged partSpecification:Weight Approx:1gSize Approx:4.5 x 4 x 0.02

Beyond Repair $15.13 Beyond Repair

Repair for Kids $26.2 Repair for Kids

Home Repair $10.76 Home Repair

Repair or Revenge $59.35 Repair or Revenge

Soul Repair $12.34 Soul Repair

Fiberglass Repair $7.97 Fiberglass Repair

Dare to Repair $11.63 Dare to Repair

Brain Repair $82.5 Brain Repair

Automotive Repair $40.8 Automotive Repair

Engine Repair $97.7 Engine Repair

Repair for Toddlers $19.46 Repair for Toddlers

Left Buttons Direction Buttons Keypad Key Flex Ribbon Cable for Sony PSP 2000 Slim $1.89 Overview:A brand new direction button keypad key flex ribbon cable for PSP 2000 slimThis flex cable is only compatible with the PSP 2000 slim series and it’s not for the original PSP model.Easy to repair your psp2 by yourselfPerfect repairment part for yor old, damaged partSpecification:Weight Approx:1gSize Approx:5.9 x 4 x 0.04

The Direction of Time $14.48 Distinguished physicist examines emotive significance of time, time order of mechanics, time direction of thermodynamics and microstatistics, time direction of macrostatistics, and time of quantum physics. Analytic methods of scientific philosophy in investigation of probability, quantum mechanics, theory of relativity, causality. 1971 edition.

Dual Direction Solenoid $160.08 Maxwell Dual Direction Solenoid

Ultimate Direction Katoa – Black $28.79 Ultimate Direction Katoa – Black

Ultimate Direction Katoa – BLUE $28.79 Ultimate Direction Katoa – BLUE

An Introduction to Spiritual Direction $13.44 An Introduction to Spiritual Direction

Spiritual Direction and the Encounter with God $11.65 Spiritual Direction and the Encounter with God

The Practice of Spiritual Direction $9.66 The Practice of Spiritual Direction

Anglican Spiritual Direction $18.91 Anglican Spiritual Direction

Where Rivers Change Direction $10.71 Where Rivers Change Direction

Spiritual Direction and Meditation $7.04 Spiritual Direction and Meditation

A Long Obedience in the Same Direction $17.17 A Long Obedience in the Same Direction

Introducing Spiritual Direction $17.81 Introducing Spiritual Direction

Moving in the Right Direction $11.15 Moving in the Right Direction

The Art Direction Handbook for Film $35.95 The Art Direction Handbook for Film

Spiritual Direction and the Care of Souls $13.32 Spiritual Direction and the Care of Souls

The Art of Spiritual Direction $17.1 The Art of Spiritual Direction

Seeking Spiritual Direction $11.69 Seeking Spiritual Direction

Running Nowhere in Every Direction $8.99 Running Nowhere in Every Direction

Direction [Japanese Import] $28.99 Direction [Japanese Import]

Practice Of Spiritual Direction $54.17 Practice Of Spiritual Direction

Spiritual Direction and the Encounter With God $11.39 Spiritual Direction and the Encounter With God

The Roadmap to Divine Direction $13.19 The Roadmap to Divine Direction

PROVO,GREG: CHANGE IN DIRECTION $14.79 PROVO,GREG: CHANGE IN DIRECTION

New Direction EP $10.23 New Direction EP

SUSAN & THE SURFTONES: DIRECTION $7.96 SUSAN & THE SURFTONES: DIRECTION

Nantucket : No Direction Home $1.24 Nantucket : No Direction Home

SMITH,JOHN: MAP OR DIRECTION $16.72 SMITH,JOHN: MAP OR DIRECTION

JAMES,BOBBY: DIRECTION OF THE WORLD $14.35 JAMES,BOBBY: DIRECTION OF THE WORLD

ZAK,ZOE B.: IN THE DIRECTION $16.79 ZAK,ZOE B.: IN THE DIRECTION

Sense of Direction It Needs to Be Restored $23.98 Sense of Direction It Needs to Be Restored

DEARLY DEPORTED: WRONG DIRECTION $22.24 DEARLY DEPORTED: WRONG DIRECTION

Imaginary Direction of Time $10.85 Imaginary Direction of Time

Moving In The Right Direction $12.27 Moving In The Right Direction

Three Women Change Direction. $10.38 Three Women Change Direction.

WINSTONS: IN A NEW DIRECTION(2) $8.12 WINSTONS: IN A NEW DIRECTION(2)

TERENCI COWARD: NEW DIRECTION $13.43 TERENCI COWARD: NEW DIRECTION

A Move In the Right Direction $15.29 A Move In the Right Direction

COUNTY LINE JUNCTION: DIRECTION $13.41 COUNTY LINE JUNCTION: DIRECTION

VERDELL,CHRIS: DIRECTION $12.12 VERDELL,CHRIS: DIRECTION

APM MINISTRIES: CHANGED DIRECTION $13.19 APM MINISTRIES: CHANGED DIRECTION

One Direction: Single 2 $3.83 One Direction: Single 2

NU DIRECTION: HERE & EVERYWHERE $9.16 NU DIRECTION: HERE & EVERYWHERE

Duplicate Bridge Direction $13.15 Duplicate Bridge Direction

Repair Parts Trackball Ring Holder for BlackBerry 9000 $1.99 “Are you looking for a trackball ring to replace the old one? Here we would like to recommend you this Repair Parts Trackball Ring Holder for BlackBerry 9000.This chrome trackball ring holder is brand new and high quality. If your cell phone center direction key is not function or difficult to navigate, that is possible that you need this one to replace it. With a new BlackBerry Trackball Ring holder, you can give your BlackBerry a custom look. The BlackBerry Trackball Ring holder will hold the trackball in place. This BlackBerry Trackball Ring holder will provide you with great performance. You can’t miss it. ”

Change of Direction $14.48 Ellen Fullman’s third album, Change of Direction, culminates her Long String Instrument project, which began in 1981 when she discovered the haunting tones created by long wires stretched over great distances. The Long String Instrument consists of 100 wi

Repair Kit $350.99 Repair Kit for Cinefold

Repair $12.99 Track Listing: 1. Rise & Shine, 2. Everybody Falls, 3. Parachute, 4. Blinking Star, 5. Lightning Strikes, 6. My Own Blood, 7. Black Leather Coat, 8. Razor, The, 9. When Your Way Gets Dark, 10. Nothing Else Remains, 11. Want You to Know

In Repair $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever.

Left Buttons Direction Buttons Keypad Key Flex Ribbon Cable for Sony PSP 3000 $1.89 Overview:Replacement repair partBuilt and designed specificallyIt can replace your old Buttons cable which doesn’t always workEasy to install. Help you to save the high repairing feeSpecification:Weight Approx:1gSize Approx:6 x 4 x 0.02

Mens O’Neill Direction Tee $20 Only YOU will know what direction you’re going in this tee from O’Neill.

Dgtl Compass W/ Direction $43.99 ROADPRO RP-1430 DIGITAL COMPASS WITH DIRECTION, TIME & TEMPERATURE DISPLAY

Finding Life Balance & Direction $23.98 This is a guided journaling experience for women of all ages seeking balance and direction in their lives.

Checkerboard, Ltd. White A Size Direction Wedding Direction & Accomodation Cards $1.49 Checkerboard, Ltd. White A Size Direction Wedding Direction & Accomodation Cards:

Checkerboard, Ltd. Cream A Size Direction Wedding Direction & Accomodation Cards $1.49 Checkerboard, Ltd. Cream A Size Direction Wedding Direction & Accomodation Cards:

Windlass Dual Direction Solenoids Dual Direction Control 1002 $147.94 Windlass Dual Direction Solenoids Dual Direction Control 1002 Lewmar Master Parts Windlass Dual Direction Solenoids – DUAL DIRECTION CONTROL 1002

Windlass Dual Direction Solenoids Windlass Dual Direction Control Box $207.94 Windlass Dual Direction Solenoids Windlass Dual Direction Control Box Lewmar Windlass Dual Direction Solenoids – WINDLASS DUAL DIRECTION CONTROL BOX

Bennett DVD – Fiberglass Repair: How To Repair Gelcoat $34.04 BENNETT DVD FIBERGLASS REPAIR HOW TO REPAIR GELCOAT

Taking Charge of Your Career Direction $99.94 Taking Charge of Your Career Direction

Small Group Leadership as Spiritual Direction $13.24 Small Group Leadership as Spiritual Direction

Spiritual Direction in the Early Christian East $30.75 Spiritual Direction in the Early Christian East

New Direction – Miracles / The Dufay Col $13.43 New Direction – Miracles / The Dufay Col

HENRY,MICKEY & NEW DIRECTION: GRATEFUL $21.43 HENRY,MICKEY & NEW DIRECTION: GRATEFUL

New Direction – Miri It Is / Dufay Colle $16.63 New Direction – Miri It Is / Dufay Colle

Musical Direction For Improv And Sketch Comedy $17.55 Musical Direction For Improv And Sketch Comedy

Lived Experience of Group Spiritual Direction $19.31 Lived Experience of Group Spiritual Direction

Piano Solo Many & One Direction $22.31 Piano Solo Many & One Direction

REDDIN,SUE & FRIENDS: RIGHT DIRECTION $21.44 REDDIN,SUE & FRIENDS: RIGHT DIRECTION

SVEN ZETTERBERG : MOVING IN THE RIGHT DIRECTION $16.87 SVEN ZETTERBERG : MOVING IN THE RIGHT DIRECTION

Direction in Pink $5.5 Layered invitation features bottom layer in shimmering bronze and top layer in fuchsia. Matching double satin ribbons are featured diagonally across invitation and through opening. Matching enclosure cards are available. This item is available with an upgraded french flap envelope. Please click here to view this envelope. You may purchase these envelopes in the shopping cart page of your order.

Direction in Lavendar $5.5 Layered invitation features bottom layer in shimmering bronze and top layer in lavender. Matching double satin ribbons are featured diagonally across invitation and through opening. Please specify name to be printed in the center. Matching enclosure cards are available. This item is available with an upgraded french flap envelope. Please click here to view this envelope. You may purchase these envelopes in the shopping cart page of your order.

Dream Direction $17.99 LIVE THE LIFE YOU DREAM OF encouraged by the wise words of Thoreau. Kit for Diane Arthurs’ counted cross stitch includes 14-count natural Aida cloth, presorted cotton floss, needle, chart and directions. Design 5″ x 10 1/4″ without frame.

Desire’s Direction $14.99 “no description”

Nintendo DS Lite Conductive Rubber Button Pads Repair and Replacement Part $1.9 Made of rubber. Comes in a set that includes: direction key button, press key button and select button to fill piece component. These buttons are placed under the main buttons of your Nintendo DS Lite to touch the main board. Used to replace old, missing or broken conductive button pads of Nintendo DS Lite. Compatible with Nintendo DS Lite only. Simple installation can be done without technical knowledge. Each product passed thorough strict test and inspection before transportation. Installation tool is not included. Size:25*25*5mmPack includes:1 Repair and Replacement Part for Nintendo DS Lite

Sound Direction $13.99 Track Listing: 1. Directions, 2. Dice Game, 3. Wanda Vidal, 4. Forty Days, 5. Play Car, 6. Divine Image, A, 7. Funky Side of Life, The, 8. Theme for Ivory Black, 9. Horse, The, 10. One for J.J./Harlem Clavinet, 11. On the Hill

Another Direction $14.99 Track Listing: 1. Revol, 2. For All We Know, 3. Duke Medley: Don’t Get Around Much Anymore/I Got It Bad/I Let a …: Don’t Get Around Much Anymore / I Got It Bad / I Let A Song Go Out Of My Heart / It Don’t Mean A Thing , 4. My Funny Valentine, 5. Blue Skies, 6. Alone Together, 7. Alone in Love with Love, 8. Jambalaya (On the Bayou)

Keyboard Keypad Button Replacement Repair Parts for NOKIA 1100 $1.99 “What you are viewing is a Keyboard Keypad Button Replacement Repair Parts for NOKIA 1100. The cell phone keypad is with ultra-slim, ultra-stylish design, great looking as well as practical. You now can bring the keyboard keypad to where you are most comfortable without any angle or direction limits. With this replacement keypad, you can give your phone a fresh look easily. Same design as the original item, it is made of quality material and provides the same function and touch. Compact design, the cell phone keypad is with outstanding appearance and comfortable touching feeling, make you feel better. A good choice for you.”

Repair Parts Colorful Chrome Trackball Ring for BlackBerry 7 / 8 Series $1.99 “Are you looking for a trackball ring to replace the old one? Here we would like to recommend you this Repair Parts Colorful Chrome Trackball Ring for BlackBerry 7 / 8 Series.This chrome trackball ring is brand new and high quality. There are so many colors for you choose. If your cell phone center direction key is not function or difficult to navigate, that is possible that you need this one to replace it. With a new colorful trackball ring, you can give your BlackBerry a custom look. The color trackball ring will hold the trackball in place. This colorful trackball ring will provide you with great performance. You can’t miss it. ”

DIRECTION CONNECTION $13.28 Description Not Available.

NEW DIRECTION $22.82 Description Not Available.

DIRECTION NASHVILLE $22.85 Description Not Available.

A Different Direction $7.5 The living theatre is potentially the most affecting of all the arts. It not only explores who we are and where we are going, but how we are connected. As we are inundated with other versions of mass media, we have nearly forgotten how important that connection is. We cannot afford to lose the power of this art at this time in our history.

Discord And Direction $16 The argument of this collection is that the cultural and intellectual legacies of postmodernism impinge, significantly and daily, on the practice of the Writing Program Administrator. WPAs work in spaces where they must assume responsibility for a multifaceted program, a diverse curriculum, instructors with varying pedagogies and technological expertise—and where they must position their program in relation to a university with its own conflicted mission, and a state with its unpredictable views of accountability and assessment. The collection further argues that postmodernism offers a useful lens through which to understand the work of WPAs and to examine the discordant cultural and institutional issues that shape their work. Each chapter tackles a problem local to its author’s writing program or experience as a WPA, and each responds to existing discord in creative ways that move toward rebuilding and redirection. It is a given that accepting the role of WPA will land you squarely in the bind between modernism and postmodernism: while composition studies as a field arguably still reflects a modernist ethos, the WPA must grapple daily with postmodern habits of thought and ways of being. The effort to live in this role may or may not mean that a WPA will adopt a postmodern stance; it does mean, however, that being a WPA requires dealing with the postmodern.

Direction-Space! $39.98 No Synopsis Available

DIRECTION: ERE $24.79 Description not provided.

Changed Direction $15.18 Description not provided.

The Right Direction $21.58 Description not provided.

Map or Direction $22.39 Description not provided.

1 Hex Die $3.15 OHZ3978: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

1 Hex Die $3.15 OHZ3981: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

A&R The Re-Edger $15.99 This innovative hand-held multi-function tool utilizes the sharpening power of ceramic steel and a replaceable honing stone for de-burring, making The Re-Edger? perfect for on-the-fly repairs. The Re-Edger? combines handheld sharpening technology and precision honing in one simple device. The ceramic steel fits player and goalie hockey blades as well as most figure skate blades. To repair the edges simply follow the instructions below. The Re-Edger? does not replace professional skate sharpening. It should be used between sharpenings and for emergency purposes. To repair skate blade edges, place skate blade between the white prongs and slide The Re-Edger? with light pressure in one direction only. Repeat if needed. To remove nicks, place stone flat onto the side of the blade. Using light pressure, rub in one direction only. Repeat until abrasion is removed. Do not over rub.

DIE 1 HEX CD 8MM-1.00MM $8.87 OHZ3942: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

GiGi Soy Creme Wax $13.99 GiGi wax is one of the best hair removal systems around. This wax can be used in both a professional salon or in your own home. Whether it is your first time waxing or you are an experienced cosmetologist, GiGi waxing systems are easy to use and gentle on your skin. GiGi Soy Cr?me Wax can be used for even the most sensitive of skin while still being amazingly effective at removing any unwanted hair. With this wax, you do not have to worry about embarrassing bumps or redness. The soy in this cr?me wax actually reduces inflammation and works to fight skin-damaging free radicals. Features: Contains nutrients to help repair and maintain healthy skin. Reduces inflammation. Gentle hair removal for sensitive skin. Removes hair without causing redness or bumps. Relaxing aroma for client comfort. Usage Tips: Remove plastic lid; slide protective collar onto wax container and place container in warmer. Set temperature on high and heat until the wax is a thin, syrup-like consistency; reduce heat to low for remainder of use. Cleanse area to be waxed and dab dry with a tissue. Holding the applicator at a 45?, spread a thin layer of wax in the same direction of the hair growth. Place muslin strip on waxed area and rub strip firmly in the direction of hair growth as well. Hold skin taut and pull strip quickly in the opposite direction of hair growth keeping strip close to the skin. Remember to never re-apply wax to treated area. Dimensions: Height: 2.5? Diameter: 4? – All dimensions are approximations.

Hanson HAN1018 High Carbon Steel Machine Screw Taper Tap 6-32 NC $9.48 OHZ3623: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1024 High Carbon Steel Machine Screw Taper Tap 8-32 NC $2.57 OHZ3626: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1026 High Carbon Steel Machine Screw Taper Tap 8-40 NS $2.36 OHZ3627: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1106 High Carbon Steel Machine Screw Plug Tap 2-56 NC $5.02 OHZ3636: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1118 High Carbon Steel Machine Screw Plug Tap 6-32 NC $5.65 OHZ3638: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1128 High Carbon Steel Machine Screw Plug Tap 10-24 NC $2.71 OHZ3641: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1131 High Carbon Steel Machine Screw Plug Tap 10-32 NF $2.71 OHZ3642: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1320 High Carbon Steel Machine Screw Fractional Taper Tap 1/4 Inch-20 NC $9.55 OHZ3672: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1329 High Carbon Steel Machine Screw Fractional Taper Tap 5/16 Inch-24 NF $15.04 OHZ3675: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1334 High Carbon Steel Machine Screw Fractional Taper Tap 3/8 Inch-16 NC $10.63 OHZ3676: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1344 High Carbon Steel Machine Screw Fractional Taper Tap 1/2 Inch-13 NC $16.51 OHZ3680: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1345 High Carbon Steel Machine Screw Fractional Taper Tap 1/2 Inch-20 NF $16.51 OHZ3681: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1349 9-16 Inch -18 Taper Tap $18.29 OHZ3683: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1352 High Carbon Steel Machine Screw Fractional Taper Tap 5/8 Inch-11 NC $19.39 OHZ3684: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1354 High Carbon Steel Machine Screw Fractional Taper Tap 5/8 Inch-18 NF $19.39 OHZ3685: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1358 High Carbon Steel Machine Screw Fractional Taper Tap 3/4 Inch-10 NC $21.58 OHZ3687: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1360 High Carbon Steel Machine Screw Fractional Taper Tap 3/4 Inch-16 NF $21.58 OHZ3688: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1420 High Carbon Steel Machine Screw Fractional Plug Tap 1/4 Inch-20 NC $9.04 OHZ3695: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1427 High Carbon Steel Machine Screw Fractional Plug Tap 5/16 Inch-18 NC $15.04 OHZ3699: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1429 High Carbon Steel Machine Screw Fractional Plug Tap 5/16 Inch-24 NF $15.04 OHZ3700: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1436 High Carbon Steel Machine Screw Fractional Plug Tap 3/8 Inch-24 NF $15.7 OHZ3702: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1439 High Carbon Steel Machine Screw Fractional Plug Tap 7/16 Inch-14 NC $16 OHZ3703: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1444 High Carbon Steel Machine Screw Fractional Plug Tap 1/2 Inch-13 NC $16.51 OHZ3705: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1452 High Carbon Steel Machine Screw Fractional Plug Tap 5/8 Inch-11 NC $9.83 OHZ3709: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1454 High Carbon Steel Machine Screw Fractional Plug Tap 5/8 Inch-18 NF $12.01 OHZ3710: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1460 High Carbon Steel Machine Screw Fractional Plug Tap 3/4 Inch-16 NF $21.58 OHZ3712: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1461 High Carbon Steel Machine Screw Fractional Plug Tap 7/8 Inch-9 NC $13.28 OHZ3713: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1465 High Carbon Steel Machine Screw Fractional Plug Tap 1 Inch-8 NC $16.01 OHZ3715: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1540 High Carbon Steel Machine Screw Fractional Bottom Tap 7/16 Inch-20 NF $16 OHZ3734: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1544 High Carbon Steel Machine Screw Fractional Bottom Tap 1/2 Inch-13 NC $11.32 OHZ3735: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1548 High Carbon Steel Machine Screw Fractional Bottom Tap 9/16 Inch-12 NC $18.29 OHZ3738: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1549 High Carbon Steel Machine Screw Fractional Bottom Tap 9/16 Inch-18 NF $18.29 OHZ3739: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1552 High Carbon Steel Machine Screw Fractional Bottom Tap 5/8 Inch-11 NC $19.39 OHZ3740: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1558 High Carbon Steel Machine Screw Fractional Bottom Tap 3/4 Inch-10 NC $21.58 OHZ3718: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1565 High Carbon Steel Machine Screw Fractional Bottom Tap 1 Inch-8 NC $27.38 OHZ3722: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1740 High Carbon Steel Machine Screw Thread Metric Plug Tap – 10mm – 1.50 $10.65 OHZ3742: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1744 High Carbon Steel Machine Screw Thread Metric Plug Tap 12mm – 1.75 $17.11 OHZ3743: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1750 High Carbon Steel Machine Screw Thread Metric Plug Tap – 14mm – 1.50 $18.63 OHZ3744: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1764 High Carbon Steel Machine Screw Thread Metric Plug Tap – 20mm -2.50 $24.22 OHZ3748: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1769 High Carbon Steel Machine Screw Thread Metric Plug Tap 24mm -3.00 $26.27 OHZ3749: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN6327 High Carbon Steel Hexagon 5/8 Inch Across Flat Die 6mm-1.00 $14.98 OHZ3905: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6544 High Carbon Steel Hexagon 1 Inch Across Flat Die 1/2 Inch-13 NC $10.32 OHZ3962: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6545 High Carbon Steel Hexagon 1 Inch Across Flat Die – 1/2 Inch-20 NF $15.09 OHZ3963: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6627 High Carbon Steel Hexagon 1 Inch Across Flat Die – 6mm-1.00 $15.2 OHZ3910: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6634 High Carbon Steel Hexagon 1 Inch Across Flat Die – 8mm-1.25 $15.2 OHZ3914: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6638 High Carbon Steel Hexagon 1 Inch Across Flat Die – 10mm-1.00 $15.2 OHZ3917: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6639 High Carbon Steel Hexagon 1 Inch Across Flat Die – 10mm-1.25 $15.2 OHZ3918: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6640 High Carbon Steel Hexagon 1 Inch Across Flat Die – 10mm-1.50 $15.2 OHZ3919: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6644 High Carbon Steel Hexagon 1 Inch Across Flat Die – 12mm-1.75 $15.2 OHZ3923: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6848 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 9/16 Inch-12 NC $14.48 OHZ3964: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6849 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 9/16 Inch-18 NF $12.91 OHZ3965: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6852 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 5/8 Inch-11 NC $13.63 OHZ3966: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6854 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 5/8 Inch-18 NF $7.77 OHZ3967: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6858 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 3/4 Inch-10 NC $13.63 OHZ3968: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6950 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 14mm-1.50 $19.64 OHZ3925: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6952 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 14mm-2.00 $19.64 OHZ3926: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6954 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 16mm-1.00 $19.43 OHZ3927: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6955 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 16mm-1.50 $19.64 OHZ3928: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6956 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 16mm-2.00 $19.64 OHZ3929: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN8467 High Carbon Steel Hexagon 1-13/16 Inch Across Flat Die – 1 Inch-14 NS $27.33 OHZ3973: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN8565 High Carbon Steel Hexagon 1-13/16 Inch Across Flat Die – 22mm-1.50 $27.42 OHZ3933: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN9712 High Carbon Steel Hexagon 1 Inch Across Flat Die – 3mm-0.50 $3.37 OHZ3935: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Bottoming Taps – tap 5/8-11nc bottoming hanson $14.99 OHZ3740: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Bottoming Taps – tap 5/8-18nf bottoming hanson $13.66 OHZ3741: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Bottoming Taps – tap 7/16-20nf bottominghanson $11.99 OHZ3734: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Hexagon Dies – die 1/2-20 1 hex hanson $9.99 OHZ3963: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 1/4-20 1 hex hanson $10.01 OHZ3954: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 1/4-20 1 hex hanson $9.99 OHZ3954: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 1/4-28 1 hex hanson $9.99 OHZ3955: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 3/8-16 1 hex hanson $10.01 OHZ3958: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 3/8-24 1 hex hanson $9.99 OHZ3959: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 7/16-14 1 hex hanson $9.99 OHZ3960: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Plug Taps – tap 1/2-13nc plug hanson $11.99 OHZ3705: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/2-20nf plug hanson $11.99 OHZ3706: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/4-24ns plug hanson $9.99 OHZ3696: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/4-28nf plug hanson $9.99 OHZ3697: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/4-40ns plug hanson $9.99 OHZ3698: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 3/16-24ns plug hanson $9.99 OHZ3694: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 5/8-11nc plug hanson $13.99 OHZ3709: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 1/2-20nf taper hanson $11.99 OHZ3681: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 5/16-18nc taper hanson $9.99 OHZ3674: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 5/8-11nc taper hanson $13.99 OHZ3684: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 7/16-20nf taper hanson $11.99 OHZ3679: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 7/8-9nc taper hanson $18.99 OHZ3689: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Bottoming Taps – tap 10-32nf bottoming hanson $9.99 OHZ3670: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -1 to 1-1/2 threads chamfered – used when threads must go to bottom of hole. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Bottoming Taps – tap 12-24nc bottoming hanson $9.99 OHZ3671: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -1 to 1-1/2 threads chamfered – used when threads must go to bottom of hole. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Bottoming Taps – tap 6-40nf bottoming hanson $18.57 OHZ3664: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -1 to 1-1/2 threads chamfered – used when threads must go to bottom of hole. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Plug Taps – tap 12-24nc plug hanson $9.99 OHZ3643: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Plug Taps – tap 6-32nc plug hanson $9.99 OHZ3638: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 10-32nf taper hanson $9.99 OHZ3629: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 4-40nc taper hanson $9.99 OHZ3621: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 6-32nc taper hanson $9.99 OHZ3623: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 8-32nc taper hanson $9.99 OHZ3626: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 8-40ns taper hanson $9.99 OHZ3627: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Metric Hexagon Dies – die 10mm-1.0 1 hex hanson $9.99 OHZ3917: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

GHD Repairs: Breathe new life into your GHD hair straighteners

Ask GHD owners regardless of whether they nevertheless have the box their GHDs arrived in and many would say sure, even decades immediately after buy. GHD proprietors are typically walking advertisement for the good quality of the item. Not just the good quality results the GHD hair straighteners develop, but also their enthusiasm for their GHD hair straighteners and the brand in common. It is not surprising that when individuals use GHD hair straighteners they will normally stick with the top brand name.

 

The benefits are outstanding and just about every model continues to boost on the previous. Nonetheless even the older designs are of such good quality that more recent designs from the opposition fall short to match their results!

 

GHD hair straighteners are good not just for straightening hair, but for including curls or waves. Proprietors will inform you about how effortlessly they glide by means of their hair, which means they are not tugging and damaging their hair. How this signifies they preserve time when they are utilizing their GHD hair straighteners.

 

GHD owners typically appear right after their GHD hair straighteners. That is why it is not surprising that when accidents arise or they break down, we repair older designs as very well as the new GHD hair straighteners.

 

Breathe new everyday life into your GHD hair straighteners!

 

We can aid you resurrect your GHD hair straighteners by repairing them. We are utilized to repairing mk3, mk4 and the specific edition sets. Nonetheless if the plastic of the GHD hair straightener is cracked or broken, we usually go over with our possible consumer beforehand if we can truly repair their GHD hair straighteners. So if this is the case for your GHD hair straighteners please speak to us in advance of booking a repair.

 

Just because the GHD hair straighteners turn into faulty does not mean it is the stop of the road for them. You do not have to throw them away since they end operating!

 

At GHD Repairs Direct we employee skilled electricians who know how to repair GHD hair straighteners. The group have the correct parts at hand and the accurate equipment to make the repair.

 

We return the GHD hair straighteners repaired in 72 hours and there are no hidden fees. Just about every pair of GHD hair straighteners undergo moveable appliance testing to ensure they are functioning properly. PAT is an critical part of our repair approach, which quite a few other electricians sadly do not carry out, even though it is a legal requirement.

 

When it arrives to hair straighteners, GHD is the brand name to use. When it arrives to GHD repairs we are the firm to employ.

About the Author

Raymond Peck is a senior associate at GHD Repairs Direct and has spent many years in the GHD Repair Industry.

 

For far more information pay a visit to: GHD Repair visit the website at http://ghdrepairsdirect.co.uk/

 

Apple iPad Battery Replacement & Repair Directions by DirectFix.com

Misto Olive Oil Sprayer …

Zyliss 20362 Lock-n-Lift Manual Can Opener, White $11.68 The Zyliss lock-n-lift can opener is ergonomically designed for comfort and maximum efficiency. Opener locks onto can for easy pouring. Magnet with release lever lifts lid and releases it for safe and easy disposal. Hands never touch the lid!…

Kyocera Ceramic Coffee Grinder $41.70 This ceramic coffee grinder features a ceramic grinding mechanism that will never alter the flavor of the grinds, resulting in fresh, flavorful, and pure coffee. The grinding mechanism is made from an advanced ceramic close in hardness to diamond that will never rust providing ultra long-life performance. The grind adjustment allows for fine to coarse grinds and the non-slip base ensures stability…

Breakdowns and Headaches $1.99 …

Intense Hydrating Mask from Moroccanoil A rich, creamy treatment, designed to hydrate and repair damaged hair.&ampnbsp With continued use, this highly effective mask revitalizes hair, restoring shine and manageability….

Neutrogena Microdermabrasion System $14.50 Visible Results in Just One UseThe Neutrogena Microdermabrasion System has a combination of exfoliating crystals and microvibrations that deliver refined texture and radiance in just one use.This system is clinically proven to deliver the same results as a microdermabrasion treatment from a dermatologist. You will see smoother, more radiant skin instantly, and firmer, younger-looking skin over tim…

CeraVe Moisturizing Cream (16 oz) $10.99 CeraVe Moisturizing Cream is a vital part of a daily skin care routine. Its patented MVE formulation releases ceramides and other essential ingredients throughout the day, so they penetrate deep into the skin to hydrate and nourish.Developed with dermatologistsHelps restore and maintain the skin´s natural protective functionPatented Multivesicular Emulsion (MVE) formulationContains ceramides tha…

Tomy Big Loader $21.05 Little Construction workers will love getting a load of this! Go to work loading and fillling, scooping and hauling, dumping and lifting. Motorized chassis knows when to automatically swap between skip loader, dump truck and tractor actions. Includes 8 feet of track and 20 rocks….

LEGO® Road Construction Set (6187) $19.99 Little construction workers can dig up all sorts of fun with this set. They can build a truck, a front loader, a steamroller and much more. Includes one minifigure. 300 pieces….

LEGO City Small Car (3177) $5.39 Pieces: 43For the driver who’s always on the go!It’s time for a fun day of driving around LEGO® City! Thanks to this compact car’s modern size and styling, you’ll be able to avoid traffic jams and squeeze into tiny parking spaces wherever you go. Includes driver minifigure.Includes car and driver minifigureZip around LEGO City in this little compact car!…

Direction $11.68 Direction

DIRECTION: THEREE DIRECTION $43.61 DIRECTION: THEREE DIRECTION

In This Direction $15.18 For his second album as a leader, pianist Benny Green is showcased in a trio with bassist Buster Wiliams and drummer Lewis Nash. Nearing the end of his two-year stint with Art Blakey’s Jazz Messengers, Green had mixed together elements of Bobby Timmons and Oscar Peterson in his own impressive style. He performs two numbers apiece by Buster Williams and Bud Powell (including “I’ll Keep Lovin’ You”), the standard “What Is There to Say,” Thelonious Monk’s complex “Trinkle Tinkle,” and his own “Dealin’ With a Feelin’” on a well-rounded and consistently swinging outing. ~ Scott Yanow, Rovi Performers: Benny Green – Piano; Buster Williams – Bass; Lewis Nash – Drums

In the Direction $19.18 Description not provided.

No Direction $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever.

A Sense of Direction $13.99 A Sense of Direction

Direction Nashville $19.99 Direction Nashville

Changing Direction $14.71 Changing Direction

Spiritual Direction $9.71 Spiritual Direction

No Direction Home $12.55 No Direction Home

A Spiritual Direction $12.47 A Spiritual Direction

Wrong Direction $8.37 Wrong Direction

Changes of Direction $22.12 Changes of Direction

Sense of Direction $17.55 Sense of Direction

New Direction $7.83 New Direction

Position and Direction $17.01 Position and Direction

Dare to Repair, Replace & Renovate $9.99 There’s no place like home! And that’s why we’re back. Dare to Repair, Replace & Renovate is the sequel to Dare to Repair , the national bestselling home repair book for women. In our first book, we taught you how to fix a leaky faucet. In this book, we teach you how to replace it. In our first book, we showed you how to change the direction of ceiling fan blades. In this book, we show you how to install a new fan. We’ve gone from basic repairs to easy projects that can make your home more comfortable, more beautiful, and more valuable. We will show you how to: Put up a tile backsplash Install a closet system Install a deadbolt lock Replace a medicine cabinet Mount blinds, shades, and shutters Install landscape lighting And we provide easy, step-by-step instructions so you can get rid of the things in your home that are making you crazy: Ugly chandelier? Gone. Outdated vanity? Out of there. Broken garbage disposal? History. Torn wallpaper? Buh-bye. Incorporating detailed illustrations with witty and encouraging instructions, Dare to Repair, Replace & Renovate will allow you to turn your project wish list into a can-do list.

Dare To Repair, Replace & Renovate $10.09 There’s no place like home! And that’s why we’re back. Dare to Repair, Replace & Renovate is the sequel to Dare to Repair , the national bestselling home repair book for women. In our first book, we taught you how to fix a leaky faucet. In this book, we teach you how to replace it. In our first book, we showed you how to change the direction of ceiling fan blades. In this book, we show you how to install a new fan. We’ve gone from basic repairs to easy projects that can make your home more comfortable, more beautiful, and more valuable. We will show you how to: Put up a tile backsplash Install a closet system Install a deadbolt lock Replace a medicine cabinet Mount blinds, shades, and shutters Install landscape lighting And we provide easy, step-by-step instructions so you can get rid of the things in your home that are making you crazy: Ugly chandelier? Gone. Outdated vanity? Out of there. Broken garbage disposal? History. Torn wallpaper? Buh-bye. Incorporating detailed illustrations with witty and encouraging instructions, Dare to Repair, Replace & Renovate will allow you to turn your project wish list into a can-do list.

Left Buttons Direction Buttons Keypad Key Flex Ribbon Cable for Sony PSP 1000 $1.89 Overview:A brand new direction button keypad key flex ribbon cable for PSP 1000This flex cable is only compatible with the PSP 1000 Easy to repair your psp 1000 by yourselfPerfect repairment part for yor old, damaged partSpecification:Weight Approx:1gSize Approx:4.5 x 4 x 0.02

Beyond Repair $15.13 Beyond Repair

Repair for Kids $26.2 Repair for Kids

Home Repair $10.76 Home Repair

Repair or Revenge $59.35 Repair or Revenge

Soul Repair $12.34 Soul Repair

Fiberglass Repair $7.97 Fiberglass Repair

Dare to Repair $11.63 Dare to Repair

Brain Repair $82.5 Brain Repair

Automotive Repair $40.8 Automotive Repair

Engine Repair $97.7 Engine Repair

Repair for Toddlers $19.46 Repair for Toddlers

Left Buttons Direction Buttons Keypad Key Flex Ribbon Cable for Sony PSP 2000 Slim $1.89 Overview:A brand new direction button keypad key flex ribbon cable for PSP 2000 slimThis flex cable is only compatible with the PSP 2000 slim series and it’s not for the original PSP model.Easy to repair your psp2 by yourselfPerfect repairment part for yor old, damaged partSpecification:Weight Approx:1gSize Approx:5.9 x 4 x 0.04

The Direction of Time $14.48 Distinguished physicist examines emotive significance of time, time order of mechanics, time direction of thermodynamics and microstatistics, time direction of macrostatistics, and time of quantum physics. Analytic methods of scientific philosophy in investigation of probability, quantum mechanics, theory of relativity, causality. 1971 edition.

Dual Direction Solenoid $160.08 Maxwell Dual Direction Solenoid

Ultimate Direction Katoa – Black $28.79 Ultimate Direction Katoa – Black

Ultimate Direction Katoa – BLUE $28.79 Ultimate Direction Katoa – BLUE

An Introduction to Spiritual Direction $13.44 An Introduction to Spiritual Direction

Spiritual Direction and the Encounter with God $11.65 Spiritual Direction and the Encounter with God

The Practice of Spiritual Direction $9.66 The Practice of Spiritual Direction

Anglican Spiritual Direction $18.91 Anglican Spiritual Direction

Where Rivers Change Direction $10.71 Where Rivers Change Direction

Spiritual Direction and Meditation $7.04 Spiritual Direction and Meditation

A Long Obedience in the Same Direction $17.17 A Long Obedience in the Same Direction

Introducing Spiritual Direction $17.81 Introducing Spiritual Direction

Moving in the Right Direction $11.15 Moving in the Right Direction

The Art Direction Handbook for Film $35.95 The Art Direction Handbook for Film

Spiritual Direction and the Care of Souls $13.32 Spiritual Direction and the Care of Souls

The Art of Spiritual Direction $17.1 The Art of Spiritual Direction

Seeking Spiritual Direction $11.69 Seeking Spiritual Direction

Running Nowhere in Every Direction $8.99 Running Nowhere in Every Direction

Direction [Japanese Import] $28.99 Direction [Japanese Import]

Practice Of Spiritual Direction $54.17 Practice Of Spiritual Direction

Spiritual Direction and the Encounter With God $11.39 Spiritual Direction and the Encounter With God

The Roadmap to Divine Direction $13.19 The Roadmap to Divine Direction

PROVO,GREG: CHANGE IN DIRECTION $14.79 PROVO,GREG: CHANGE IN DIRECTION

New Direction EP $10.23 New Direction EP

SUSAN & THE SURFTONES: DIRECTION $7.96 SUSAN & THE SURFTONES: DIRECTION

Nantucket : No Direction Home $1.24 Nantucket : No Direction Home

SMITH,JOHN: MAP OR DIRECTION $16.72 SMITH,JOHN: MAP OR DIRECTION

JAMES,BOBBY: DIRECTION OF THE WORLD $14.35 JAMES,BOBBY: DIRECTION OF THE WORLD

ZAK,ZOE B.: IN THE DIRECTION $16.79 ZAK,ZOE B.: IN THE DIRECTION

Sense of Direction It Needs to Be Restored $23.98 Sense of Direction It Needs to Be Restored

DEARLY DEPORTED: WRONG DIRECTION $22.24 DEARLY DEPORTED: WRONG DIRECTION

Imaginary Direction of Time $10.85 Imaginary Direction of Time

Moving In The Right Direction $12.27 Moving In The Right Direction

Three Women Change Direction. $10.38 Three Women Change Direction.

WINSTONS: IN A NEW DIRECTION(2) $8.12 WINSTONS: IN A NEW DIRECTION(2)

TERENCI COWARD: NEW DIRECTION $13.43 TERENCI COWARD: NEW DIRECTION

A Move In the Right Direction $15.29 A Move In the Right Direction

COUNTY LINE JUNCTION: DIRECTION $13.41 COUNTY LINE JUNCTION: DIRECTION

VERDELL,CHRIS: DIRECTION $12.12 VERDELL,CHRIS: DIRECTION

APM MINISTRIES: CHANGED DIRECTION $13.19 APM MINISTRIES: CHANGED DIRECTION

One Direction: Single 2 $3.83 One Direction: Single 2

NU DIRECTION: HERE & EVERYWHERE $9.16 NU DIRECTION: HERE & EVERYWHERE

Duplicate Bridge Direction $13.15 Duplicate Bridge Direction

Repair Parts Trackball Ring Holder for BlackBerry 9000 $1.99 “Are you looking for a trackball ring to replace the old one? Here we would like to recommend you this Repair Parts Trackball Ring Holder for BlackBerry 9000.This chrome trackball ring holder is brand new and high quality. If your cell phone center direction key is not function or difficult to navigate, that is possible that you need this one to replace it. With a new BlackBerry Trackball Ring holder, you can give your BlackBerry a custom look. The BlackBerry Trackball Ring holder will hold the trackball in place. This BlackBerry Trackball Ring holder will provide you with great performance. You can’t miss it. ”

Change of Direction $14.48 Ellen Fullman’s third album, Change of Direction, culminates her Long String Instrument project, which began in 1981 when she discovered the haunting tones created by long wires stretched over great distances. The Long String Instrument consists of 100 wi

Repair Kit $350.99 Repair Kit for Cinefold

Repair $12.99 Track Listing: 1. Rise & Shine, 2. Everybody Falls, 3. Parachute, 4. Blinking Star, 5. Lightning Strikes, 6. My Own Blood, 7. Black Leather Coat, 8. Razor, The, 9. When Your Way Gets Dark, 10. Nothing Else Remains, 11. Want You to Know

In Repair $4.99 We believe it is important to preserve what makes music special, and make it easy to craft listening experiences. At MOG, browse millions songs and play them instantly. Or just turn on radio where you can stop and replay songs. You can also create playlists for any occasion, and even download songs to your mobile. We are dedicated to employing the cleanest but most powerful technology so you can enjoy music as much as ever.

Left Buttons Direction Buttons Keypad Key Flex Ribbon Cable for Sony PSP 3000 $1.89 Overview:Replacement repair partBuilt and designed specificallyIt can replace your old Buttons cable which doesn’t always workEasy to install. Help you to save the high repairing feeSpecification:Weight Approx:1gSize Approx:6 x 4 x 0.02

Mens O’Neill Direction Tee $20 Only YOU will know what direction you’re going in this tee from O’Neill.

Dgtl Compass W/ Direction $43.99 ROADPRO RP-1430 DIGITAL COMPASS WITH DIRECTION, TIME & TEMPERATURE DISPLAY

Finding Life Balance & Direction $23.98 This is a guided journaling experience for women of all ages seeking balance and direction in their lives.

Checkerboard, Ltd. White A Size Direction Wedding Direction & Accomodation Cards $1.49 Checkerboard, Ltd. White A Size Direction Wedding Direction & Accomodation Cards:

Checkerboard, Ltd. Cream A Size Direction Wedding Direction & Accomodation Cards $1.49 Checkerboard, Ltd. Cream A Size Direction Wedding Direction & Accomodation Cards:

Windlass Dual Direction Solenoids Dual Direction Control 1002 $147.94 Windlass Dual Direction Solenoids Dual Direction Control 1002 Lewmar Master Parts Windlass Dual Direction Solenoids – DUAL DIRECTION CONTROL 1002

Windlass Dual Direction Solenoids Windlass Dual Direction Control Box $207.94 Windlass Dual Direction Solenoids Windlass Dual Direction Control Box Lewmar Windlass Dual Direction Solenoids – WINDLASS DUAL DIRECTION CONTROL BOX

Bennett DVD – Fiberglass Repair: How To Repair Gelcoat $34.04 BENNETT DVD FIBERGLASS REPAIR HOW TO REPAIR GELCOAT

Taking Charge of Your Career Direction $99.94 Taking Charge of Your Career Direction

Small Group Leadership as Spiritual Direction $13.24 Small Group Leadership as Spiritual Direction

Spiritual Direction in the Early Christian East $30.75 Spiritual Direction in the Early Christian East

New Direction – Miracles / The Dufay Col $13.43 New Direction – Miracles / The Dufay Col

HENRY,MICKEY & NEW DIRECTION: GRATEFUL $21.43 HENRY,MICKEY & NEW DIRECTION: GRATEFUL

New Direction – Miri It Is / Dufay Colle $16.63 New Direction – Miri It Is / Dufay Colle

Musical Direction For Improv And Sketch Comedy $17.55 Musical Direction For Improv And Sketch Comedy

Lived Experience of Group Spiritual Direction $19.31 Lived Experience of Group Spiritual Direction

Piano Solo Many & One Direction $22.31 Piano Solo Many & One Direction

REDDIN,SUE & FRIENDS: RIGHT DIRECTION $21.44 REDDIN,SUE & FRIENDS: RIGHT DIRECTION

SVEN ZETTERBERG : MOVING IN THE RIGHT DIRECTION $16.87 SVEN ZETTERBERG : MOVING IN THE RIGHT DIRECTION

Direction in Pink $5.5 Layered invitation features bottom layer in shimmering bronze and top layer in fuchsia. Matching double satin ribbons are featured diagonally across invitation and through opening. Matching enclosure cards are available. This item is available with an upgraded french flap envelope. Please click here to view this envelope. You may purchase these envelopes in the shopping cart page of your order.

Direction in Lavendar $5.5 Layered invitation features bottom layer in shimmering bronze and top layer in lavender. Matching double satin ribbons are featured diagonally across invitation and through opening. Please specify name to be printed in the center. Matching enclosure cards are available. This item is available with an upgraded french flap envelope. Please click here to view this envelope. You may purchase these envelopes in the shopping cart page of your order.

Dream Direction $17.99 LIVE THE LIFE YOU DREAM OF encouraged by the wise words of Thoreau. Kit for Diane Arthurs’ counted cross stitch includes 14-count natural Aida cloth, presorted cotton floss, needle, chart and directions. Design 5″ x 10 1/4″ without frame.

Desire’s Direction $14.99 “no description”

Nintendo DS Lite Conductive Rubber Button Pads Repair and Replacement Part $1.9 Made of rubber. Comes in a set that includes: direction key button, press key button and select button to fill piece component. These buttons are placed under the main buttons of your Nintendo DS Lite to touch the main board. Used to replace old, missing or broken conductive button pads of Nintendo DS Lite. Compatible with Nintendo DS Lite only. Simple installation can be done without technical knowledge. Each product passed thorough strict test and inspection before transportation. Installation tool is not included. Size:25*25*5mmPack includes:1 Repair and Replacement Part for Nintendo DS Lite

Sound Direction $13.99 Track Listing: 1. Directions, 2. Dice Game, 3. Wanda Vidal, 4. Forty Days, 5. Play Car, 6. Divine Image, A, 7. Funky Side of Life, The, 8. Theme for Ivory Black, 9. Horse, The, 10. One for J.J./Harlem Clavinet, 11. On the Hill

Another Direction $14.99 Track Listing: 1. Revol, 2. For All We Know, 3. Duke Medley: Don’t Get Around Much Anymore/I Got It Bad/I Let a …: Don’t Get Around Much Anymore / I Got It Bad / I Let A Song Go Out Of My Heart / It Don’t Mean A Thing , 4. My Funny Valentine, 5. Blue Skies, 6. Alone Together, 7. Alone in Love with Love, 8. Jambalaya (On the Bayou)

Keyboard Keypad Button Replacement Repair Parts for NOKIA 1100 $1.99 “What you are viewing is a Keyboard Keypad Button Replacement Repair Parts for NOKIA 1100. The cell phone keypad is with ultra-slim, ultra-stylish design, great looking as well as practical. You now can bring the keyboard keypad to where you are most comfortable without any angle or direction limits. With this replacement keypad, you can give your phone a fresh look easily. Same design as the original item, it is made of quality material and provides the same function and touch. Compact design, the cell phone keypad is with outstanding appearance and comfortable touching feeling, make you feel better. A good choice for you.”

Repair Parts Colorful Chrome Trackball Ring for BlackBerry 7 / 8 Series $1.99 “Are you looking for a trackball ring to replace the old one? Here we would like to recommend you this Repair Parts Colorful Chrome Trackball Ring for BlackBerry 7 / 8 Series.This chrome trackball ring is brand new and high quality. There are so many colors for you choose. If your cell phone center direction key is not function or difficult to navigate, that is possible that you need this one to replace it. With a new colorful trackball ring, you can give your BlackBerry a custom look. The color trackball ring will hold the trackball in place. This colorful trackball ring will provide you with great performance. You can’t miss it. ”

DIRECTION CONNECTION $13.28 Description Not Available.

NEW DIRECTION $22.82 Description Not Available.

DIRECTION NASHVILLE $22.85 Description Not Available.

A Different Direction $7.5 The living theatre is potentially the most affecting of all the arts. It not only explores who we are and where we are going, but how we are connected. As we are inundated with other versions of mass media, we have nearly forgotten how important that connection is. We cannot afford to lose the power of this art at this time in our history.

Discord And Direction $16 The argument of this collection is that the cultural and intellectual legacies of postmodernism impinge, significantly and daily, on the practice of the Writing Program Administrator. WPAs work in spaces where they must assume responsibility for a multifaceted program, a diverse curriculum, instructors with varying pedagogies and technological expertise—and where they must position their program in relation to a university with its own conflicted mission, and a state with its unpredictable views of accountability and assessment. The collection further argues that postmodernism offers a useful lens through which to understand the work of WPAs and to examine the discordant cultural and institutional issues that shape their work. Each chapter tackles a problem local to its author’s writing program or experience as a WPA, and each responds to existing discord in creative ways that move toward rebuilding and redirection. It is a given that accepting the role of WPA will land you squarely in the bind between modernism and postmodernism: while composition studies as a field arguably still reflects a modernist ethos, the WPA must grapple daily with postmodern habits of thought and ways of being. The effort to live in this role may or may not mean that a WPA will adopt a postmodern stance; it does mean, however, that being a WPA requires dealing with the postmodern.

Direction-Space! $39.98 No Synopsis Available

DIRECTION: ERE $24.79 Description not provided.

Changed Direction $15.18 Description not provided.

The Right Direction $21.58 Description not provided.

Map or Direction $22.39 Description not provided.

1 Hex Die $3.15 OHZ3978: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

1 Hex Die $3.15 OHZ3981: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

A&R The Re-Edger $15.99 This innovative hand-held multi-function tool utilizes the sharpening power of ceramic steel and a replaceable honing stone for de-burring, making The Re-Edger? perfect for on-the-fly repairs. The Re-Edger? combines handheld sharpening technology and precision honing in one simple device. The ceramic steel fits player and goalie hockey blades as well as most figure skate blades. To repair the edges simply follow the instructions below. The Re-Edger? does not replace professional skate sharpening. It should be used between sharpenings and for emergency purposes. To repair skate blade edges, place skate blade between the white prongs and slide The Re-Edger? with light pressure in one direction only. Repeat if needed. To remove nicks, place stone flat onto the side of the blade. Using light pressure, rub in one direction only. Repeat until abrasion is removed. Do not over rub.

DIE 1 HEX CD 8MM-1.00MM $8.87 OHZ3942: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

GiGi Soy Creme Wax $13.99 GiGi wax is one of the best hair removal systems around. This wax can be used in both a professional salon or in your own home. Whether it is your first time waxing or you are an experienced cosmetologist, GiGi waxing systems are easy to use and gentle on your skin. GiGi Soy Cr?me Wax can be used for even the most sensitive of skin while still being amazingly effective at removing any unwanted hair. With this wax, you do not have to worry about embarrassing bumps or redness. The soy in this cr?me wax actually reduces inflammation and works to fight skin-damaging free radicals. Features: Contains nutrients to help repair and maintain healthy skin. Reduces inflammation. Gentle hair removal for sensitive skin. Removes hair without causing redness or bumps. Relaxing aroma for client comfort. Usage Tips: Remove plastic lid; slide protective collar onto wax container and place container in warmer. Set temperature on high and heat until the wax is a thin, syrup-like consistency; reduce heat to low for remainder of use. Cleanse area to be waxed and dab dry with a tissue. Holding the applicator at a 45?, spread a thin layer of wax in the same direction of the hair growth. Place muslin strip on waxed area and rub strip firmly in the direction of hair growth as well. Hold skin taut and pull strip quickly in the opposite direction of hair growth keeping strip close to the skin. Remember to never re-apply wax to treated area. Dimensions: Height: 2.5? Diameter: 4? – All dimensions are approximations.

Hanson HAN1018 High Carbon Steel Machine Screw Taper Tap 6-32 NC $9.48 OHZ3623: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1024 High Carbon Steel Machine Screw Taper Tap 8-32 NC $2.57 OHZ3626: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1026 High Carbon Steel Machine Screw Taper Tap 8-40 NS $2.36 OHZ3627: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1106 High Carbon Steel Machine Screw Plug Tap 2-56 NC $5.02 OHZ3636: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1118 High Carbon Steel Machine Screw Plug Tap 6-32 NC $5.65 OHZ3638: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1128 High Carbon Steel Machine Screw Plug Tap 10-24 NC $2.71 OHZ3641: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1131 High Carbon Steel Machine Screw Plug Tap 10-32 NF $2.71 OHZ3642: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1320 High Carbon Steel Machine Screw Fractional Taper Tap 1/4 Inch-20 NC $9.55 OHZ3672: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1329 High Carbon Steel Machine Screw Fractional Taper Tap 5/16 Inch-24 NF $15.04 OHZ3675: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1334 High Carbon Steel Machine Screw Fractional Taper Tap 3/8 Inch-16 NC $10.63 OHZ3676: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1344 High Carbon Steel Machine Screw Fractional Taper Tap 1/2 Inch-13 NC $16.51 OHZ3680: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1345 High Carbon Steel Machine Screw Fractional Taper Tap 1/2 Inch-20 NF $16.51 OHZ3681: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1349 9-16 Inch -18 Taper Tap $18.29 OHZ3683: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1352 High Carbon Steel Machine Screw Fractional Taper Tap 5/8 Inch-11 NC $19.39 OHZ3684: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1354 High Carbon Steel Machine Screw Fractional Taper Tap 5/8 Inch-18 NF $19.39 OHZ3685: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1358 High Carbon Steel Machine Screw Fractional Taper Tap 3/4 Inch-10 NC $21.58 OHZ3687: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1360 High Carbon Steel Machine Screw Fractional Taper Tap 3/4 Inch-16 NF $21.58 OHZ3688: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1420 High Carbon Steel Machine Screw Fractional Plug Tap 1/4 Inch-20 NC $9.04 OHZ3695: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1427 High Carbon Steel Machine Screw Fractional Plug Tap 5/16 Inch-18 NC $15.04 OHZ3699: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1429 High Carbon Steel Machine Screw Fractional Plug Tap 5/16 Inch-24 NF $15.04 OHZ3700: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1436 High Carbon Steel Machine Screw Fractional Plug Tap 3/8 Inch-24 NF $15.7 OHZ3702: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1439 High Carbon Steel Machine Screw Fractional Plug Tap 7/16 Inch-14 NC $16 OHZ3703: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1444 High Carbon Steel Machine Screw Fractional Plug Tap 1/2 Inch-13 NC $16.51 OHZ3705: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1452 High Carbon Steel Machine Screw Fractional Plug Tap 5/8 Inch-11 NC $9.83 OHZ3709: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1454 High Carbon Steel Machine Screw Fractional Plug Tap 5/8 Inch-18 NF $12.01 OHZ3710: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1460 High Carbon Steel Machine Screw Fractional Plug Tap 3/4 Inch-16 NF $21.58 OHZ3712: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1461 High Carbon Steel Machine Screw Fractional Plug Tap 7/8 Inch-9 NC $13.28 OHZ3713: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1465 High Carbon Steel Machine Screw Fractional Plug Tap 1 Inch-8 NC $16.01 OHZ3715: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1540 High Carbon Steel Machine Screw Fractional Bottom Tap 7/16 Inch-20 NF $16 OHZ3734: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1544 High Carbon Steel Machine Screw Fractional Bottom Tap 1/2 Inch-13 NC $11.32 OHZ3735: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1548 High Carbon Steel Machine Screw Fractional Bottom Tap 9/16 Inch-12 NC $18.29 OHZ3738: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1549 High Carbon Steel Machine Screw Fractional Bottom Tap 9/16 Inch-18 NF $18.29 OHZ3739: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1552 High Carbon Steel Machine Screw Fractional Bottom Tap 5/8 Inch-11 NC $19.39 OHZ3740: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1558 High Carbon Steel Machine Screw Fractional Bottom Tap 3/4 Inch-10 NC $21.58 OHZ3718: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1565 High Carbon Steel Machine Screw Fractional Bottom Tap 1 Inch-8 NC $27.38 OHZ3722: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

Hanson HAN1740 High Carbon Steel Machine Screw Thread Metric Plug Tap – 10mm – 1.50 $10.65 OHZ3742: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1744 High Carbon Steel Machine Screw Thread Metric Plug Tap 12mm – 1.75 $17.11 OHZ3743: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1750 High Carbon Steel Machine Screw Thread Metric Plug Tap – 14mm – 1.50 $18.63 OHZ3744: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1764 High Carbon Steel Machine Screw Thread Metric Plug Tap – 20mm -2.50 $24.22 OHZ3748: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN1769 High Carbon Steel Machine Screw Thread Metric Plug Tap 24mm -3.00 $26.27 OHZ3749: This item features: -Ideal for auto repair and machinery where metric threads are specified. -The first number represents the diameter of the tap in millimeters, the second number is the distance between the threads in millimeters. -3 to 5 threads chamfered – general purpose. -Thread Standard: Metric. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap. -Packing Type: Bulk.

Hanson HAN6327 High Carbon Steel Hexagon 5/8 Inch Across Flat Die 6mm-1.00 $14.98 OHZ3905: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6544 High Carbon Steel Hexagon 1 Inch Across Flat Die 1/2 Inch-13 NC $10.32 OHZ3962: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6545 High Carbon Steel Hexagon 1 Inch Across Flat Die – 1/2 Inch-20 NF $15.09 OHZ3963: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6627 High Carbon Steel Hexagon 1 Inch Across Flat Die – 6mm-1.00 $15.2 OHZ3910: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6634 High Carbon Steel Hexagon 1 Inch Across Flat Die – 8mm-1.25 $15.2 OHZ3914: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6638 High Carbon Steel Hexagon 1 Inch Across Flat Die – 10mm-1.00 $15.2 OHZ3917: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6639 High Carbon Steel Hexagon 1 Inch Across Flat Die – 10mm-1.25 $15.2 OHZ3918: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6640 High Carbon Steel Hexagon 1 Inch Across Flat Die – 10mm-1.50 $15.2 OHZ3919: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6644 High Carbon Steel Hexagon 1 Inch Across Flat Die – 12mm-1.75 $15.2 OHZ3923: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6848 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 9/16 Inch-12 NC $14.48 OHZ3964: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6849 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 9/16 Inch-18 NF $12.91 OHZ3965: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6852 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 5/8 Inch-11 NC $13.63 OHZ3966: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6854 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 5/8 Inch-18 NF $7.77 OHZ3967: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6858 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 3/4 Inch-10 NC $13.63 OHZ3968: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6950 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 14mm-1.50 $19.64 OHZ3925: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6952 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 14mm-2.00 $19.64 OHZ3926: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6954 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 16mm-1.00 $19.43 OHZ3927: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6955 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 16mm-1.50 $19.64 OHZ3928: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN6956 High Carbon Steel Hexagon 1-7/16 Inch Across Flat Die 16mm-2.00 $19.64 OHZ3929: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN8467 High Carbon Steel Hexagon 1-13/16 Inch Across Flat Die – 1 Inch-14 NS $27.33 OHZ3973: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN8565 High Carbon Steel Hexagon 1-13/16 Inch Across Flat Die – 22mm-1.50 $27.42 OHZ3933: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

Hanson HAN9712 High Carbon Steel Hexagon 1 Inch Across Flat Die – 3mm-0.50 $3.37 OHZ3935: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Bottoming Taps – tap 5/8-11nc bottoming hanson $14.99 OHZ3740: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Bottoming Taps – tap 5/8-18nf bottoming hanson $13.66 OHZ3741: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Bottoming Taps – tap 7/16-20nf bottominghanson $11.99 OHZ3734: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Hexagon Dies – die 1/2-20 1 hex hanson $9.99 OHZ3963: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 1/4-20 1 hex hanson $10.01 OHZ3954: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 1/4-20 1 hex hanson $9.99 OHZ3954: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 1/4-28 1 hex hanson $9.99 OHZ3955: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 3/8-16 1 hex hanson $10.01 OHZ3958: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 3/8-24 1 hex hanson $9.99 OHZ3959: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Hexagon Dies – die 7/16-14 1 hex hanson $9.99 OHZ3960: This item features: -Ideal for maintenance and repair work. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

High Carbon Steel Fractional Plug Taps – tap 1/2-13nc plug hanson $11.99 OHZ3705: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/2-20nf plug hanson $11.99 OHZ3706: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/4-24ns plug hanson $9.99 OHZ3696: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/4-28nf plug hanson $9.99 OHZ3697: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 1/4-40ns plug hanson $9.99 OHZ3698: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 3/16-24ns plug hanson $9.99 OHZ3694: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Plug Taps – tap 5/8-11nc plug hanson $13.99 OHZ3709: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 1/2-20nf taper hanson $11.99 OHZ3681: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 5/16-18nc taper hanson $9.99 OHZ3674: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 5/8-11nc taper hanson $13.99 OHZ3684: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 7/16-20nf taper hanson $11.99 OHZ3679: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Fractional Taper Taps – tap 7/8-9nc taper hanson $18.99 OHZ3689: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -No. of Flutes: 4. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Bottoming Taps – tap 10-32nf bottoming hanson $9.99 OHZ3670: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -1 to 1-1/2 threads chamfered – used when threads must go to bottom of hole. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Bottoming Taps – tap 12-24nc bottoming hanson $9.99 OHZ3671: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -1 to 1-1/2 threads chamfered – used when threads must go to bottom of hole. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Bottoming Taps – tap 6-40nf bottoming hanson $18.57 OHZ3664: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -1 to 1-1/2 threads chamfered – used when threads must go to bottom of hole. -Cutting Direction: Right. -End Shape: Chamfer – 1 1/2 Threads. -Style: Bottoming. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Plug Taps – tap 12-24nc plug hanson $9.99 OHZ3643: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Plug Taps – tap 6-32nc plug hanson $9.99 OHZ3638: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 3 to 5 Threads. -Style: Plug. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 10-32nf taper hanson $9.99 OHZ3629: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 4-40nc taper hanson $9.99 OHZ3621: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 6-32nc taper hanson $9.99 OHZ3623: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 8-32nc taper hanson $9.99 OHZ3626: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Machine Screw Taper Taps – tap 8-40ns taper hanson $9.99 OHZ3627: This item features: -Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not critical. -Straight flutes are ground to provide rapid chip removal for efficient threading. -Designed for hand threading work in a variety of materials. -Taps produce a class 2B thread. -Cutting Direction: Right. -End Shape: Chamfer – 8 to 10 Threads. -Style: Taper. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Standard Hand Tap.

High Carbon Steel Metric Hexagon Dies – die 10mm-1.0 1 hex hanson $9.99 OHZ3917: This item features: -Ideal for auto repair and machinery where metric threads are specified. -Recommended for cutting external threads by hand. -In areas with limited space, the dies can be used with a wrench or socket. -Advanced die geometry provides faster cutting and longer life. -Die size is etched on each tool for easy identification. -Thread Standard: Metric. -Cutting Direction: Right. -Tool Shape: Hexagon. -Applicable Materials: Most Metals. -Material: High Carbon Steel. -Type: Solid Die.

More»